Kangaroo Kn-18GH Manual De Instrucciones página 42

2B
OPERATION
2.3 Technical Data
Dimensions (mm)
Shoe size (mm)
Working weight (Kg)
Compaction depth (mm)
Percussion rate (1/min)
Travel speed (m/min)
Jumping height (mm)
Impact force (Kg)
Engine
Engine type
Rated output
Continuous output
Rated speed (rpm)
Engine lubrication level (L)
Engine lubrication
Fuel tank (L)
Oil scale
2.4 General Characteristics
The Rammer Kn-18DY will be used by personnel trained for this job, it will only be used in specific
jobs for which it has been technically developed, after having read the instructions contained in this
manual and which must be followed correctly.
The manufacturer or authorised distributor must be consulted about any doubts.
Industrias Technoflex S.A., will not accept any responsibility derived from incorrect installation,
manipulation, or misuse of the tamping rammer.
2B-4
725 x 438 x 1020
280 x 333
82
400 - 600
650
14 - 18
45 - 55
1800
YANMAR – L48N
4-stroke, air-cooled, Diesel
engine
4.7 H.P / 3600 rpm
4.2 H.P / 3600 rpm
3600
0.8
SAE 15W - 40
2.0
Diesel
ENGLISH