Start Preparations - RC Logger RC EYE One S Manual De Uso

7. sTarT PreParaTIons

Inserting batteries in the transmitter
1. Remove the battery
compartment lid (1) of the
transmitter. You need to
push the lever (2) down
slightly for this.
2. Insert two micro/AAA size
batteries with the correct
polarity (3). Observe the
corresponding icons in the
battery compartment. Insert
the battery compartment lid
again.
Operation of the transmitter with rechargeable batteries is not recommended because of
the lower cell voltage (battery = 1.5 V, rechargeable battery = 1.2 V) and the self-discharge
of rechargeable batteries. Quick feedback of the transmitter on low charge status of the
transmitter power supply would result.
Since the transmitter requires very little power, batteries will keep much longer. We recommend
the use of high-quality alkaline batteries.
10