User Manual
CAUTION: To protect your privacy, always turn the system off when
not in use. It is possible that the Parents unit may be interfered
from other devices in the 2.4 GHz frequency range. To minimize this
potential problem, more than 65.000 ID code have been provided
for your use. If you experience interference while using one ID code
setting, simply select to another ID code.
Battery Installation
Please charge the rechargeable batteries
before fi rst time usage.
1. Ensure the unit is off . Press the button
on the belt clip and rotate it clockwise or
counterclockwise for 90º.
2. Open the battery compartment door.
3. Insert 3 AAA batteries into the Baby
unit and Parents unit according to the +/-
signs shown in the battery compartment,
respectively.
4. Replace battery compartment door.
Press and rotate the belt clip to its normal
position.
Battery Tips:
- If the product is not in use for a long time, disconnect both units
from the household electrical outlet. And remove the batteries
or the exhausted batteries from the units, otherwise battery
leakage and corrosion can damage them.
- Dispose the batteries safely.
- Non-rechargeable battery is not to be recharged.
- Rechargeable batteries are only to be charged under adult
supervision.
EN
Baby MUM RB101
button
22