Rimax Baby RB101 Manual De Usuario página 25

EN
User Manual
Baby MUM RB101
NOTE:
For the fi rst time usage, turn on both units, they can automatically
scan the corresponding code at once without press any key. If reset
the corresponding code for both units, user has to press the LINK
key.
B. Baby unit emission:
1. Place Baby unit in room where you intend to use it.
2. Push the SENSITIVITY switch to a desired position to turn on the
Baby unit transmission.
3. As soon as the Baby unit transmits a signal, then:
Constantly changing display-readouts
4. The transmitter is standby status when no signal is transmitted.
C. Parents unit reception:
1. Place Parents unit in room where you intend to use it.
2. Slide the VOLUME switch to a desired position and the unit is
ready for reception.
3. If the unit receives a signal
Constantly changing display-readouts
4. The receiver is standby status when no signal is received.
When you experience interference (buzzing or static, etc.), reset both
units to another corresponding code (details please refer to page 30
Scan the Corresponding Code).
25