Rimax Baby RB101 Manual De Usuario página 30

User Manual
Operating and Setup
A. Scan the Corresponding Code
1. Turn on both units. The Baby unit will emit a random ID code to
Parents unit automatically without pressing any key.
2. Once scanned the corresponding code, the units are ready for use.
The code is recorded even thought you turn off the units or recharge
the batteries. Or else the unit is not for use.
NOTICE:
- When the unit turns off , the corresponding code will be stored
and automatically used when the unit turns on again.
- The search for the codes of both units is essential after lighting
them.
B. LINK key
LINK key is located at the bottom of the Parents unit and Baby unit.
It is used for eliminating the corresponding code recorded in the
unit and reset a new corresponding code for the Parents unit and
Baby unit.
The Parents unit / Baby unit can connect with another Baby unit /
Parents unit with the LINK key to scan a new corresponding code
for them.
1. Ensure both units are turned ON. Press the LINK key of the units
with a spiky and thin object (such as toothpick).
2. The both units begin to scan corresponding code.
EN
Baby MUM RB101
30