ero electronic ELK Guía Del Usario página 39

Mnemonic
T.REMN TIME REMAINING Time remaining to reach the set time – applies to
all timer types.
TM.CFG TIMER CONFIGURATION configures the timer type - Dwell, Delay,
Soft Start or none (only when in Reset)
The programmer is an orderable option. ProG is only shown if the
programmer option has been ordered. For programmer parameters
see Programmer Addendum Part No. HA029085.
TM.RES TIMER RESOLUTION selects hours or minutes (only when in Reset) –
applies to all timer types.
END.T TIMER END TYPE The action of the timer when it has timed out can
be selected from Dwell (control continues at the setpoint), Off (control
outputs turn off), SP2 (control at setpoint 2). Can be changed while
the timer is running – applies to Dwell types only.
THRES TIMER START THRESHOLD The timer will not run until the PV
becomes in range of the value set by this parameter. This value can be
changed when the timer is running – applies to Dwell and Programmer
timer types only.
Part number HA028438. Issue 3.0.
Scrolling Display and description
Oct-05
Range
0:00 to 99.59 hh:mm: or
mm:ss
none None
Dwel Dwell
Delayed switch
DeLy
on
sfst Soft start
Prog Programmer
Hours
Hour
min
Minutes
OFF Control OP
goes to zero
Dwel Control
continues at
SP1
SP2 Go to SP2
OFF or 1 to 9999
37