How To Use The Basic Functions - Inax SpaLet Manual De Uso

How to Use the Basic Functions

Cleansing
Water is sprayed from the posterior
cleansing nozzle.
1
Press the Cleansing button.
Side Panel
3
Press the STOP button to stop
the spraying.
* An automatic self-stop function is included
which stops both rear and front cleansing
automatically after 2 minutes.
Remote Control
Bidet
Water is sprayed from the feminine
cleansing nozzle.
1
Press the Bidet button.
2
Press the [+] or [-] Spray Strength
button to adjust the shower strength.
For Panel Control:
There are 3 levels of spray strength.
For Remote Controlt:
There are 6 levels of spray strength.
Adjust the spray strength as desired.
* The indicator LED cycles through the spray strength
settings each time the button is pressed.
* The indicator LED goes out after several seconds
2 additional settings above default: press STOP and
CLEANSING buttons simultaneously for 2 seconds.
Press here
on seat
21