Installing This Product; Installation Requirements; Contents - Inax SpaLet Manual De Uso

3. Installing This Product

Installation Requirements

Before installing this product, ensure that each of the following installation
requirements are met.

Contents

Remove the parts from the box and make sure all the parts in the parts list (below) are present. Inspect
the parts carefully to make sure they are in good condition.
If any part is damaged or missing, do not install this product. Contact a customer service representative
for the part(s) you need.
The following parts are included:
• Seat unit (with heated toilet seat, toilet seat lid and power cord)
• Mounting plate
• Manual
• Mounting bolts, brackets, and bushings (2 pieces each)
• Seat unit water supply hose (with 1 clip and 1 washer)
Side Panel
Mounting plate
(This plate attaches to the seat unit.)
Seat unit
*Remote control unit and bracket are
packed in the box.
Remote control unit
For remote control unit
Batteries (2)
Manual
Water supply hose
(w/ T-junction)
Mounting bolt
Plastic
Clip
Bracket
Bushing
Clip
6
FOR REMOTE VERSION ONLY:
• Remote control
• Bracket
• Batteries
• Wood screw
• Plastic anchors
Bracket
Wood
Plastic
screws
anchors
Washer