König SAS-TRANS30 Manual De Uso página 5

Monitor
1. Pull-out antenna
2. Monitor
3. AV input jack connector
4. AV output jack connector
1. Slide the antenna (1) upwards from the rear of the monitor.
2. Place the monitor on its support (6) on a stable surface.
The monitor can also be mounted on an adjustable support (order
separately with art. nr. SAS-BRACK40) which can be mounted at the bottom
of the monitor and fitted with 3 screws on a horizontal or vertical surface.
3. Insert the DC plug into the DC 12 V input jack connector (5).
4. Insert the AC/DC adapter into the wall socket.
5. You can connect an extra monitor to the AV output connector (4).
5. DC 12 V input jack connector
6. Support
7. Fitting point for adjustable support
5
ENGLISH