Troubleshooting; Maintenance, Cleaning And Care - Easy Home STEAM MOP DM 2012 Manual Del Usuario

Steam Mop

TROUBLESHOOTING

Defect: Cause:
The operating The device is not con-
control lamp is
nected to a grounded
not on.
power outlet.
The device is The water tank is not
not emitting any correctly inserted or
steam.
empty.
The steam button has
not been pressed.
Lime residue on The device has been left
the floor. on the same spot for too
long.
In case of malfunctions not listed here, please contact our customer service.
Our customer service representatives will be glad to assist you with any que-
stions. You can find our service address in the warranty terms. The operating
manual can be requested from customer service in PDF format. You can also
order additional fabric covers from our customer service.
23
hup-service@h-u-p.com
MODEL: DM 2012 PRODUCT CODE: 40041
USA
Troubleshooting
Remedy:
Plug the power plug
into a grounded power
outlet.
You must properly fill
and insert the water
tank into the device.
Press the steam button.
In most cases, these
residues can be remo-
ved with a damp cloth.
If necessary, pour some
vinegar onto the cloth if
the floor material allows
for that.
AFTER SALES SUPPORT
USA 1-800-886-8506
10/2015
Steam Mop

MAINTENANCE, CLEANING AND CARE

Please always unplug the power plug and let the device
completely cool down before you clean and store it!
WARNING
Make sure that no liquids get into the device interior. Nev-
er submerge the device in water. Electrical shock hazard!
WARNING
Never use aggressive or abrasive detergents or sharp
objects.
NOTICE
• Empty the water tank (5) after every use and rinse it periodically with
clear water.
• Use a dry or moderately damp, well wrung cloth to clean the external
housing of the device and the external surface of the water tank (5).
• Make sure to subsequently wipe the device dry.
Depending on the lime content of the water, the steam may, after a certain
period of use, not properly emit from the device and lime residue may need
to be removed from the steam outlet of the basic unit (6). In this case pro-
ceed as follows:
• Remove the cleaning head (8) from the basic unit (6) by unscrewing the
short screw that fastens the cleaning head to the basic unit and remove
the basic unit (6) in an upward motion from the cleaning head (8).
• The steam outlet is now accessible on the bottom of the basic unit (6).
• Take the supplied cleaning pin (12) and insert the narrow side
into the steam outlet opening. Carefully move the cleaning pin
(12) back and forth to remove any existing lime residue.
• The steam outlet is now no longer blocked. Reinstall the cleaning head
(8) as described in "Assembly".
AFTER SALES SUPPORT
1-800-886-8506
USA
MODEL: DM 2012
USA
Maintenance, Cleaning and Care
24
hup-service@h-u-p.com
PRODUCT CODE: 40041 10/2015