Easy Home STEAM MOP DM 2012 Manual Del Usuario página 7

Steam Mop
- Not for space heating.
- Unplug from outlet when not in use and before cleaning. Allow
to cool before putting on or taking off parts, and before clean-
ing the appliance.
- To avoid the risk of electric shock, do not immerse the appli-
ance in water or other liquids.
- Should the device accidentally have dropped into water, first,
unplug the plug and then remove the device from the water!
You should subsequently refrain from operating the device,
and instead have it inspected by a certified service company.
This also applies if the electric cord or the device is damaged
or if the device was dropped. Electrical shock hazard!
- Never open the device and never try to reach inside with metal
objects. Electrical shock hazard!
- Electrical devices aren't children's toys! For this reason, the
device should be used and stored out of children's reach.
Children do not recognize the hazards that arise when using
electrical devices.
- Repairs may only be carried out by certified specialized repair
shops. Non-expertly repaired devices pose a risk for the user.
- Only connect the device to a properly installed grounded pow-
er outlet with a mains voltage according to type plate.
- Do not leave the device without supervision during operation
to avoid accidents.
- When the device's power supply cable cable is damaged it
must be replaced by the manufacturer or its AFTER SALES
SUPPORT or a similarly qualified person to avoid any risk of
injury, etc.
- Only use original equipment and accessories. When using
non-original accessories, the risk of accidents increases. Any
liability is void in case of accidents or damage resulting from
the use of non-original manufacturer accessories. Any device
damage resulting from the use of non-original manufacturer
accessories voids any warranty claim.
15
hup-service@h-u-p.com
MODEL: DM 2012 PRODUCT CODE: 40041
USA
Safety
AFTER SALES SUPPORT
USA 1-800-886-8506
10/2015
Steam Mop
SAFEGUARDS FOR STEAM MOP
- Never point the steam exit opening at people or pets and nev-
er at electrical devices (e.g. fan heaters or electrical heaters).
- The steam mop must not be left without supervision while
connected to the power supply.
- Do not operate the steam mop if the housing shows visible
damage or if the power cord is defective or if you suspect an
invisible defect (e.g. after a drop) or if the device leaks. Do not
carry the device by the power cord. Do not pull on the power
cord when you disconnect the device plug from the power
supply connection.
- Switch the device off and disconnect it from the power sup-
ply before attempting any cleaning, maintenance, attaching or
removing accessories. Let the device and all accessory parts
cool down to room temperature before attempting any clean-
ing or maintenance and before you remove or attach any ac-
cessories.
- Only operate the device with the fabric cover installed.
- Do not expose the device to rain, frost or heat of any type.
- Do not use any defective accessories.
- Please ensure that the power cord does not become a tripping
hazard.
- Do not cover the device during operation.
- Please ensure that device openings are not blocked or clogged.
- Caution! Hot steam emitting from the device! Risk of injury!
- Be especially careful when cleaning steps on stairs. Risk of
falling!
- After cleaning, the floor or the cleaned surface will be moist.
You should only step on the cleaned surface once it has fully
dried. Slipping hazard!
- Ensure that the water tank fill level does not exceed the "MAX"
mark.
- Only use the device with a properly inserted and filled water
tank. Only add clean and clear water to the water tank. Never
use any additives such as detergents, etc.
AFTER SALES SUPPORT
USA 1-800-886-8506
MODEL: DM 2012
USA
Safety
16
hup-service@h-u-p.com
PRODUCT CODE: 40041 10/2015