Installing Batteries; Using The Ac Adapter - HoMedics BPA-060 Manual Del Usuario

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open
the battery compartment.
2. Install or replace 4 "AA " sized alkaline batteries in the
battery compartment according to the indications inside
the compartment.
3. Close the battery cover by pushing in the top end of
the battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
Replace all batteries at one time (as simultaneous set).
Use only 1.5V "AA" alkaline batteries. Remove batteries
when unit is not in use for extended periods of time. Date
and time will need to be reset if batteries are removed
or replaced. Clean contacts on battery and in battery
compartment with a soft dry cloth each time you install
batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
Battery
Cover
11
USING THE AC ADAPTER (NOT INCLUDED)
This monitor is designed for operation with batteries or
an optional AC adapter. Please use only with compatible
AC adapter with required voltage and current as indicated
in this manual. Contact HoMedics Consumer Relations at
1-800-466-3342 to purchase a compatible AC adapter.
Note:
• When the AC adaptor is your main power supply, make
sure the adaptor plug can be easily removed from the unit.
• Please unload the batteries when operating with an AC
adapter for an extended period of time. Leaving the
batteries in the compartment for a long time may cause
leakage, which may lead to damage to the unit.
• No batteries are needed when operating with an AC adapter.
• Date and time will need to be reset if AC adapter is
unplugged and unit is without batteries.
Connect the AC adapter with the AC adapter jack in
the back of the unit as shown below.
Connect
AC Adapter
here
AC Adapter
Input: 100-240V~0.18A 50/60Hz
Output: 6V DC 1A 6W Max
12