Installing Batteries - HoMedics BPA-960BT Manual

INSTALLING BATTERIES

1. Press foward on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 "AA " sized alkaline batteries in the battery
compartment according to
the indications inside the
compartment.
3. Close the battery cover by
pushing in the top end of the
battery door.
Replace the batteries if:
• The low battery symbol appears.
• When any button is pressed
and nothing is displayed on the
screen.
Note:
• If the batteries are removed or replaced, the date and time will
need to be re-set either manually or automatically using your
Bluetooth ®
• Replace all batteries at one time (as simultaneous set).
Use only 1.5V "AA" alkaline batteries. Do not mix alkaline,
standard (carbon-zinc) or rechargeable (cadmium) batteries.
• When the batteries are removed, the measurement values
stored in memory are retained. However, the date and time
must be reset.
• Remove batteries when unit is not in use for extended periods
of time.
• Clean contacts on battery and in battery compartment with a
soft dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
• DO NOT dispose of batteries in fire. Batteries may explode
or leak.
• Recycle or dispose of properly in accordance with local,
state, province, and country regulations.
mobile device.
12
Battery
Cover