Brunton ECLIPSE 8099 Manual De Instrucciones página 14

4. Place rubber shoe back on compass.
5. Close cover and open the sight
cover to 45°.
6. Position compass at eye-level with
mirror extending outward to the
left.
7. Above the horizon (level, 0°), sight
object through sight hole (figure 39).
· Align cover line with the sight
cover line.
8. Rotate azimuth ring until the reflection
of the arrow, on the blue orienting circle, is aligned with the
green clinometer arrow (figure 39).
9. Position compass close enough to read inclination in the
magnified index lens.
· Read angle from the black scale – 30° (figure 40).
11.3 b -- Down Angle
1. Remove rubber shoe to expose back side of compass.
2. Locate the clinometer index mark on the back side of the azimuth ring.
3. Holding azimuth ring stationary, rotate vial until the arrow on the
points to the clinometer index mark (figure 38).
4. Place rubber shoe back on the compass.
Figure 41
9. Position the compass close enough to read inclination in the
200
20
index lens.
· Read 20° from the
Figure 42
Figure 39
Figure 40
blue orienting circle
5. Close cover and open the sight
cover to 45°.
6. Position the compass at eye-level
with mirror extending outward to
the right.
7. Below the horizon (level, 0°), sight
object through sight hole
· Align cover line with the sight
cover line.
8. Rotate azimuth ring until the
reflection of arrow on the
orienting circle is aligned with the
green clinometer arrow (figure 41).
green scale (figure 42).
21
30
210
(figure 41).
blue