Operating Controls - Dremel 335 Instrucciones De Funcionamiento Y Seguridad

Euro 335 7-03.qxd.Gesamt 17.11.2003 13:58 Uhr Seite 3
Depth Stop
Adjustment
Nut, Lower
Hand Grip
(stationary)
Shaft Lock
Circle
Guide
Assembling Plunge Router Attachment to your Tool
ATTACHMENT FOR USE WITH DREMEL
ROTARY TOOL MODELs 285, 395 & 398.
Disconnect the plug from
WARNING
!
the power source before
making any assembly, adjustments or
changing accessories.
safety measures reduce the risk of starting
the tool accidentally.
1. Remove collet nut, then remove housing
cap from your rotary tool and set housing
cap aside (Fig. 2). The housing cap must
be reinstalled when this attachment is
not used. Once housing cap has been
removed, reassemble the collet nut.
GB

Operating Controls

Adjustment
Nut, Upper
Release
Button
Button
Such preventive
FIG. 2
Housing
Cap
Rotary Tool
Speed Control
(Wrench not included)
Depth Scale
(English/Metric)
Edge Guide
1. Place tool into your router attachment
with the shaft lock button facing forward
as shown (Fig. 3).
2. Screw mounting nut clockwise onto the
threaded portion of your Rotary Tool and
securely tighten with the mounting wrench
provided.
Shaft Lock
Button
Mounting
Nut
3
FIG. 1
Dremel
Mounting Wrench
& Storage Area
Hand Grip
(turn to lock)
Collet Nut Wrench
Storage Area
FIG. 3
Mounting
Wrench