Operating Controls - Dremel 335 Instrucciones De Funcionamiento Y Seguridad

DM 2610920458 05-12_DM 2610920458 08-10 5/14/12 11:18 AM Page 3
Depth Stop
Adjustment
Nut, Lower
Hand Grip
(stationary)
Circle
Guide
Assembling Plunge Router Attachment to your Tool
ATTACHMENT FOR USE WITH DREMEL
ROTARy TOOL MODELS 100, 200, 275, 285,
300, 395, 398, 400, 3000, 4000, 8200, 8220 &
4200.
Disconnect the plug from
WARNING
the power source before
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of starting the
tool accidentally.
1. Remove collet nut, then remove housing
cap from your rotary tool and set housing
cap aside (Fig. 2). The housing cap must
be reinstalled when this attachment is not
used. Once housing cap has been
removed, reassemble the collet nut.

Operating Controls

Adjustment
Nut, Upper
Release
Button
Shaft Lock
Button
FIG. 2
Housing
Cap
Speed Control
Edge Guide
2. Place tool into your router attachment with
the shaft lock button facing forward as
shown (Fig. 3).
3. Thread mounting nut clockwise onto the
threaded portion of your Rotary Tool and
securely tighten with the mounting wrench
provided.
Shaft Lock
Button
Mounting
Nut
3
FIG. 1
Dremel
Rotary Tool
Mounting Wrench
& Storage Area
Hand Grip
(turn to lock)
Collet Nut Wrench
Storage Area
(Wrench not included)
Depth Scale
(English/Metric)
FIG. 3
Mounting
Wrench