Inserting A Battery; Turning The Power On/Off - Panasonic RP-BTGS10 Instrucciones De Funcionamiento

Inserting a battery

Insert the supplied or optional rechargeable battery (or any commercially
available alkaline dry cell battery) into the headset.
1
2
3
■
Note
• Panasonic batteries are recommended if using commercially available
alkaline dry cell batteries.
• Using manganese dry cell batteries is not recommended as the battery life
is short.

Turning the power on/off

Press and hold the power button
• The power is turned on, and the LED
(blue) will light up once.
To turn the power off
• Press and hold the power button
■
Note
• When the headset is not operated for a certain period of time, the power
will automatically turn off. (See "Auto power off" (P. 13))
VQT5C48_RP-BTGS10_PP_En.indb 7 VQT5C48_RP-BTGS10_PP_En.indb 7
Open the battery lid of the headset
• Put your fingertip on the groove on the outside lid. Pull the lid towards
you.
• Press on the inside lid, and lower the lid.
Place the battery inside
• Check the battery terminals ( ,
Make sure the terminal goes in first.
Close the lid
• Lift up the inside lid. Press the protrusion
and close the lid securely.
• Close the outside lid. Press the lid
surface and close it securely.
for approximately 2 seconds.
Groove
Outside
lid
Inside
lid
).
for approximately 2 seconds.
Protrusion
Outside
lid
AAA battery
Power button
7
7
2013/11/29 19:47:22 2013/11/29 19:47:22