Publicidad
Idiomas disponibles
Idiomas disponibles
Genesis
®
nG4, G4, G2LB, Avdelok
Instructions for Collar Cropper Attachment
S a f e t y R u l e s
This technical datasheet must be read with particular attention to the safety rules listed in the appropriate Genesis
G2LB Instruction Manual and to the following safety rules, by any person fitting or operating the collar cropper on the Genesis
nG4, G4 or G2LB tools.
1
Do not use collar cropper outside the design intent printed below.
2
Do not use equipment or tools with this collar cropper other than those recommended and supplied by Avdel UK Limited.
3
The tool and collar cropper must be maintained in a safe working condition at all times. The operator must follow the daily and weekly
service checks detailed in the Genesis
4
The tool and collar cropper shall at all times be operated in accordance with the relevant health and safety legislation. Any question
regarding the correct operation of the tool and operator safety should be directed to your local Avdel company or authorized
representative.
5
Do not operate a tool that is pointed towards any person(s).
6
Do not operate the tool if it is not fitted with a complete collar cropper assembly.
7
FINGERS AND ALL BODY PARTS MUST REMAIN CLEAR OF THE COLLAR CROPPER WHEN OPERATING THE TOOL.
8
When using the tool and collar cropper, the wearing of safety glasses is required both by the operator and others in the vicinity to protect
against ejection of debris. We recommend wearing gloves if there are sharp edges or corners on the application.
9
Take care to avoid entanglement of loose clothes, ties, long hair, cleaning rags etc., in the moving parts of the tool and collar cropper.
10 When carrying the tool from place to place keep hands away from the trigger to avoid inadvertent start up.
11 THE AIR SUPPLY MUST BE DISCONNECTED WHEN FITTING OR REMOVING ANY NOSE ASSEMBLY.
®
nG4, G4 or G2LB Instruction Manual.
®
/Maxlok
®
Collar Cropper
®
nG4, G4 or
®
Publicidad
