Declaration Of Conformity - MIRKA AROS-B 150NV Instrucciones De Manejo

en | us • ca

Declaration of conformity

Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® AROS-B & AOS-B 32 mm (1 ¼") 8,000 rpm Electrical
Random Orbital Sander (see "Technical data" table for particular model) to which this declaration relates are
in conformity with the following standard or other normative document: EN 60745-1:2009/A11:2010,
EN 60745-2-4:2009/A11:2011, EN 55014-1:2017, EN 55014-2:2015, EN 300 328 V2 1 1(2016-11) in accordance
with the regulations 2006/42/EC, 2014/30/EU, 2011/65/EU, 2014/53/EU, 2012/19/EU Charger safety specification
according to EN 60335-1:2012/A11:2014, EN 60335-2-29/A2:2010, EN 62233:2008, EN 50581:2012 in accordance with
the regulations 2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU
Jeppo 8.11.2018
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of conformity,
Required personal safety equipment, Warning, Caution,
Additional safety warnings, Technical data table,
Noise and vibration information, Proper use of
tool, Battery and charger, How to get started,
Operating instructions, Maintenance, Further service,
Troubleshooting guide, Disposal information
We reserve the right to make changes to this manual without prior notice
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool Keep these
instructions in a safe and accessible place
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• State and local regulations
190
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V
Wear
safety glasses
CONFORMS TO UL STD
60745-1, 60745-2-4
CERTIFIED TO CAN/CSA STD
C22 2 No 60745-1, C22 2 No 60745-2-4
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel +358 20 760 2111
Fax +358 20 760 2290
www mirka com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask