Victor 1460-3 Manual De Instrucciones página 6

5. A02346F Decimal Point Selector
A
Monetary Add Mode: At this setting, amounts entered are assumed to be
monetary. The calculator automatically supplies a decimal point to the left of
the last two digits entered. Use this setting to add, subtract, multiply and
divide decimals.
02346
Fixed decimal point mode; these settings specify the number of digits to the
right of the decimal point that are shown in the result.
F
Floating decimal point mode; this setting specifies that all digits of the result
are shown, up to a maximum of 10 on model 1430-3, and 12 on model
1460-3. If the result exceeds these capacities, excess digits to the right of
the decimal point are dropped. No rounding takes place.
6. ↓ ↓ 5/4 ↑ ↑
Decimal Rounding Selector
↓ ↓
This causes automatic round down (truncation).
5/4
This setting causes automatic round off. If the last digit of the result that will
be printed or printed/displayed upon rounding is followed by a value of 0 to
4, the digit is unchanged. If the last digit of the result that will be printed or
printed/displayed upon rounding is followed by a value of 5 to 9, the digit is
rounded up.
↑ ↑
This setting causes automatic round up
7. NP P IC Printer Select Switch
NP Printer is activated only when feed key or non-add/date key is pressed.
P
Printer is activated as long as calculator is turned on.
IC
Activates item count to print.
8. [+/-] Sign Change Key
9. [%]
10. [∆ ∆ %]
Reverse the sign on the display
Percent Key
Completes percent calculation when Multiple or Division key is used.
Delta Percentage
Automatically compares any two amounts and then calculates and prints
the difference and percent of change.
6