S.R.Smith WetDek Instrucciones Para La Instalacion Y Para El Usuario página 8

OPTIONAL INSTALLATION ADD-ONS
The following items are not provided with your WetDek kit but can be purchased additionally from
many local suppliers.
1. ADDITIONAL
VALVES:
control the height of
each individual zone it
is required that a 1"
Globe
placed after each 1"
HPV Valve
shown in FIGURE 8.
This allows the WetDek
to be customized even
more.
can be set to the exact
same level or setup on
a tiered system that
separates each zone by
measured increments.
4. AUTO-FILL: Another optional
item for the Stand Alone version
of the WetDek, an Auto-Fill can
be attached to the top 1 ½"
GLOBE
To help
Valve (5) be
(3) as
Water heights
FIGURE 9
2. SPIGOT
3. UNION FITTINGS: It is also
8
FIGURE 8
FOR STAND
ALONE: A spigot can be
incorporated in the stand
alone version of the WetDek
to allow for draining the
reservoir, as shown
FIGURE 9; this spigot
should be located between
the pump (8)
filter/chlorinator (9).
spigot must be easily
accessible to allow
connection to a hose. No
spigot is required for the
poolside version because
the pool will have its own
drain system.
a good idea to use union
fittings before and after
each piece of equipment
used in the WetDek system
to allow for easy repair or
replacement. This is also
shown in FIGURE 9.
in
and
The
for