Topcom HBM Watch 1000 Manual De Usuario página 7

9.2 COUNTDOWN TIMER ACTIVATION
• Press ST/SP to start/stop countdown timer.
• There will be a 10 seconds beep when the function is completed.
"OVER" will displayed.
• To stop the beep and reload the pre-set data, press any key.
• To reload pre-set time at any time, press T.MODE for 2 seconds.
10 ALARM
You can set 3 different alarm times
• Press T-MODE to select "ALARM" mode.
• Press ST/SP to select Alarm 1, 2 or 3.
• Press SET for 3 seconds to enter alarm setting mode.
• Press T-MODE or ST/SP to set timer ON.
• Press P-MODE to confirm. The hour is blinking.
• Press T-MODE to add one hour or hold to add to the value
• Press ST/SP to decrease one hour or hold to decrease the
• Press P-Mode to confirm and select minutes.
• Follow the same instruction to change the minutes.
• Once the alarm is set, press SET to confirm. The Alarm
To de-activate the alarm, follow the same instructions, but
select OFF.
When the alarm time is reached, a beep will sound for 30 seconds.
Press any key to stop the alarm.
automatically.
value automatically.
icon ' ' is displayed.
TOPCOM HBM Watch 1000
7