Intended Use; Technical Data; Noise/Vibration Information - Bosch ART 35 Manual Original

OBJ_DOKU-32553-003.fm Page 9 Friday, August 30, 2013 10:28 AM
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Wear protective gloves
Do not use flowing water to clean the ma-
chine
Reaction direction
Movement direction

Technical Data

Line trimmer
Article number
Rated power
No-load speed
Cutting line feed
Adjustable handle
Cutting line diameter
Cutting diameter
Cutting spool capacity
Weight according to EPTA-Procedure 01/2003
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60335.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values (triax vector sum) determined according to
EN 60335:
Vibration emission value a
h
Uncertainty K
Bosch Power Tools
Symbol Meaning
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts

Intended Use

The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 °C and 40 °C
ambient temperature.
W
-1
min
mm
cm
m
kg
see type plate on the garden product
3 600 H78 M21
dB(A)
dB(A)
dB =1.5
2
m/s
2
m/s =1.5
English | 9
ART 35
3 600 H78 M..
600
8000
Bump feed

1.6
35
8
4.6
/II
3 600 H78 M00
3 600 H78 M40
3 600 H78 M70
86 87
95 94
=1.5
5.5 5.5
=1.5
F 016 L70 944 | (30.8.13)