Installations; Installation - Clarion DB625MP Manual De Instrucciones

8. INSTALLATIONS

Installation

I Installation
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Note:
• Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the
sound may skip).
I Installing in Japanese-Made Cars
1. Refer to the section "Removing the hard rubber frame" and then remove the hard rubber frame.
2. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure
the unit with the accessory screws.
T
N
T: Toyota cars
N: Nissan cars
Notes:
• During installation, do not use any screws except for those provided. The use of different screws might
result in damage to the main unit.
• Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.
22
DB625MP
Firewall or metal support
Metal mounting strap
(commercially available)
N
T/N
T
Accessory 3...for Nissan car
Accessory 4...for Toyota car
Bend the tabs of the mounting
sleeve with a screwdriver or
similar utensil and attach it in
place.
8 mm
MAX.
ø5mm
ø5mm
8mm
MAX.