Tabla de contenido
Publicidad
Operation
2500600042 Rev I
7. Figure E shows the thermostat adjusting lug. The factory setting for normal operation
is at approximately 11 o'clock. To raise the temperature, turn the lug clockwise. To
lower the temperature, turn the lug counter-clockwise. To turn the thermostat off,
turn the lug all the way to the left.
8. Fill the water bottle with fresh water.
9. Reassemble the brush, brush tank, water-regulator and water bottle.
10. Plug in the power cord and turn on the power.
17
Publicidad
Tabla de contenido
