Service Information - DeWalt DW168F Manual De Instrucciones

Ocultar thumbs Ver también para DW168F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Drain Carburetor bowl (Fig. 1)
1. Place the fuel valve lever (J, if equipped) in the closed position.
2. Place an OSHA-ap proved con tain er suitable for fuel under the
carburetor bowl (M). notE: Using a funnel will allow the fuel to flow
into the container with less spillage.
3. Remove the carburetor bowl drain (L).
4. Fuel will drain from carburetor bowl.
5. When drained, replace carburetor bowl drain.
Cleaning Debris Screen (if equipped)
(Fig. 1)
WARNING: Risk of explosion or fire. Gasoline vapor is highly flam-
mable. Refuel outdoors only in well-ventilated areas. Do not refuel or
check gasoline level while the engine is running. Do not store, spill, or
use gasoline near an open flame, a source of sparks (such as weld-
ing), or near operating electrical equipment.
1. Remove fuel cap (A).
2. Remove debris screen (P).
3. Clean debris screen. Use compressed
air to blow off debris.
WARNING: When using compressed
air, user always must wear eye protec-
tion that conforms to ANSI Z87.1. (CAN/
CSA Z94.3).
4. Replace debris screen and fuel cap.
Storage
WARNING: If the engine has been running, the muffler will be
very hot. To reduce the risk of injury, allow engine to cool before
proceeding.
If storing the unit for more than thirty days drain all fuel out of fuel
lines, tank and carburetor bowl. Drain oil and refill with fresh, clean
oil. IMportant: Fuel will oxidize and deteriorate in storage. If fuel
is allowed to deteriorate during storage the carburetor and fuel
related parts will need to be serviced. notE: Fuel stabilizer can
be used to lengthen the fuel life, follow the fuel stabilizer's recom-
mended instructions

Service Information

Please have the following information available for all service calls:
Model Number ____________ Serial Number ___________
Date and Place of Purchase ______________________________
repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a D
center, a D
WALT authorized service center or other qualified
e
service personnel. Always use identical replacement parts.
Full Two year Warranty
P
D
WALT engines are warranted for two years from date of purchase.
e
A
We will repair, without charge, any defects due to faulty materials or
workmanship. For warranty repair information, call 1-800-4-D
This warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This warranty
gives you specific legal rights and you may have other rights which
vary in certain states or provinces.
latIn aMErIca: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained either in the packaging, call
the local company or see website for warranty information.
13
WALT factory service
e
WALT.
e

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dw177fDw188f

Tabla de contenido