Taylor TE10C Manual De Instrucciones página 6

Troubleshooting
• If there are no items on the platform, but the LCD does not
show zero, press the "TARE/ZERO" button to reset the
scale to zero.
• Overload Warning: Should "
during a weighing, this indicates that the maximum
weighing capacity of the scale has been exceeded.
Remove the weight immediately; otherwise, permanent
damage could occur.
Precautions
This scale is engineered to give you years of satisfactory
service if you handle it carefully. Here are a few precautions:
1. Always read instructions thoroughly to ensure that you have the full
benefit of all the unit's features.
2. DO NOT immerse unit in water, as doing so will cause damage to
internal components and void the warranty. If you spill liquid on it, dry
it immediately with a soft, lint-free cloth.
3. DO NOT clean the unit with an abrasive or corrosive material. This
may scratch the plastic parts and corrode the electronic circuits.
4. DO NOT subject the units to excessive force, shock, dust,
temperature or humidity. This may result in malfunction, shorter
electronic life span, damaged battery and distorted parts.
5. DO NOT operate or store the scale in high temperature or humidity
conditions. The heat or moisture may interfere with the scale's internal
components.
6. DO NOT tamper with the unit's internal components. Doing so will
invalidate the warranty on the units and may cause damage. The unit
contains no user-serviceable parts.
7. This scale is an extremely sensitive weighing device. To avoid damage
to the unit or the battery, do not store anything on the scale.
8. Remove the battery if the scale will not be used for a long period
of time.
9. Do not dispose of batteries in fire. Batteries may explode or leak.
6
" appear on the display