Mitsubishi Electric MLZ-KP09NA Manual De Instrucciones página 9

W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
E.g. : Runs at 75°F (24°C) from waking up to leaving home, and runs at
81°F (27°C) from getting home to going to bed on weekdays.
Runs at 81°F (27°C) from waking up late to going bed early on
weekends.
Setting1 Setting2
Mon
ON OFF
75°F (24°C)
Fri
AM 6:00 AM 8:30
Setting1
Sat
ON
Sun
AM 8:00
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press to enter the weekly timer setting mode.
2
Press and
Pressing selects the day of
the week to be set.
* All days can be selected.
Setting3 Setting4
ON OFF
81°F (27°C)
PM 5:30 PM 10:00
Setting2
OFF
81°F (27°C)
PM 9:00
* blinks.
to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing selects
the setting number.
3
Press ,
temperature.
Pressing
selects OFF/ON timer.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
* The temperature can be set between 61°F and 88°F (16°C and 31°C) at
weekly timer.
Press and
other days and/or numbers.
4
Press to complete and transmit the weekly timer
setting.
Note:
• Press to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
after all the settings are complete. All the weekly timer settings will be saved.
• Press to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press to turn the weekly timer ON. (
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press again to turn the weekly timer OFF. (
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
.
1
Press to enter the weekly timer setting mode.
* blinks.
2
Press or
day or number.
Press to exit the weekly timer setting.
, and to set ON/OFF, time, and
E.g. : [ON], [AM 6:00]
and [75°F
(24°C)] are
selected.
Pressing
Pressing
adjusts the time.
adjusts the tem-
perature.
to continue setting the timer for
* which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
to view the setting of the particular
once
goes out.)
En-8