Start Procedure - Trotec TTK 70 S Manual De Instrucciones

Ocultar thumbs Ver también para TTK 70 S:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83

Start procedure

Insert air filter
A.
B.
C.
D.
E.
B - 7
Notes regarding operation
• Open at least one of the three air outlets (2, 3, 8).
Otherwise, the overheating protection is activated
and the device switches off.
• After a power cut, press the mains switch (11) to
start humidifying again.
• After switching off the device, close all open air
outlets and flaps.
Switch device on
1. Ensure that the condensation tank is empty and
inserted correctly. Otherwise, the device will not
operate!
2. Insert the mains plug into a properly secured
mains power socket.
3. Open the upper air outlet (2) and/or the side air
outlet (3). If necessary, open the adjustable outlet
flap (8).
4. Switch on the device at the mains switch (11).
5. Check whether the "Automatic" indicator
light (22) lights up red. => The device always
starts in "Automatic" operation mode!
6. Check whether the condensation tank indicator
light (17) is out.
7. Press the "MODE" button (12) again to choose the
operation mode you want. The corresponding
indicator light must light up in red.
Operating manual – Dehumidifier TTK 70 S
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido