Royal Catering RCKT 180/70 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
turer. Safety of operation define the EU regulation that apply at the time of produc-
tion. If the unit is in continuous mode, you must check the real current recommen-
dations regarding security measures. Follow the recommendations safety and health
of this manual as well as safety guidelines and regulations for the protection of the
environment specific and applicable to the place of use of the device.
Caution! Additional Information!
The device can't be used by:
• Persons with physical or mental disabilities;
• Children;
• Persons with insufficient experience, and/or insufficient knowledge;
This manual should be kept near the device. In case of passing or selling the de-
vice to the other person's, the manual should be also submitted with the device.
All persons operating the device must comply with the recommendations contai-
ned in this manual and follow all safety regulations.
The device is designed to work in enclosed areas.
Safe operation is ensured only in the conditions of use in accordance with its inten-
ded purpose.
If you need to carry out the work related to the installation of the device, its main-
tenance or repair, they must be carried out by a qualified service technician. Cooling
tables are intended for cooling food. Cooling tables are not intended to storing of
pharmaceutical products or combustible or blasting materials or liquids such as ether,
alcohol, petrol or glue, etc.
Caution! Additional Information!
It is forbidden to use the machine for purposes other than cooling foods. Using tables
for purposes other than cooling foods entails consequences in terms of loss of war-
ranty, the exclusion of claims against the manufacturer for damages arising from use
of the device for purposes other than cooling foods and thus for any consequences
thereof related to the user's responsibility.
3. BEFORE FIRST USE – DEVICE CHECKING, TRANSPORT AND STORAGE
When the goods are received proceed with opening the packaging if there are no
signs of damage. if when the goods are delivered there are signs of damage to the
packaging, such as agent or courier, and within three days from the date indicated
on the documents draw up a detailed list and report of all damage to the goods. The
various items used for packaging (cardboard, plastic straps, polyurethane foam) should
be conserved, so that the device can be sent back to the service centre in best con-
ditions in case of problem. The package should be closed until the installation of the
device.
16
4. DEVICE INSTALLATION AND MAINTENANCE
Caution! Additional Information!
Correct connection of the device to the single socket with earth is the guarantee of
proper work. In the case of inappropriate installation, the machine may cause injury.
The cable must not come into contact with sources of heat and sharp edges. The
cable must not sag and cannot be immersed in water.
Do not use malfunctioning or damaged device.
Parts or accessories not recommended by the manufacturer cannot be used in
the device.
The act of using parts not recommended by the manufacturer, resulting in loss of
warranty and can lead to a direct threat to the life or health of the user.
It is forbidden to move, adjusting and rotating the device in the course of work.
Remove the packaging after unpacking.
The device should be placed on a flat, steady surface which can withstand its
weight.
It is forbidden to place the device on a combustible surface.
It is forbidden to place the device near an open flame, electric stoves, coal sto-
ves or other heat sources, as well as near direct sunlight. High temperatures can
damage the cooling capacity and rise the consumption of electricity.
The device should be adjusted to ensure good air circulation. Must maintain a
minimum distance of 10 cm to the rear wall, the sides 15 cm and 35 cm up.
Do not block ventilation holes.
It is forbidden to place the device in areas with high humidity.
The device must not be connected to the outlet other than wall-mounted so-
cket, do not use a multiple outlet adapter or multiple sockets.
The unit should be cleaned after unpacking and before connecting to the power.
Turn on the device by pressing the power switch ON / OFF
DEFROSTING:
The appliance will automatically run a defrost cycle every 6 hours. The cycle starts
from the time the appliance is initially powered up.
To manually defrost the appliance:
1. Press and hold the DOWN
2. The defrost cycle will start immediately and the defrost LED
Note: Starting a manual defrost also resets the automatic defrost timer. The next
automatic defrost will start 6 hours after the manual defrost has finished.
Rev. 19.05.2017
Rev. 19.05.2017
button for 5 seconds
illuminates.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido