Sears KENMORE ELITE ULTRACLEAN 665.1276 Serie Manual De Uso página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ULTRACLEANTMFILTRATION SYSTEM
Your dishwasher
has the latest technology
in dishwasher
filtration.
This triple
filtration
system
minimizes
sound and optimizes
water
and energy
consumption
while
providing
superior
cleaning
performance.
Throughout
the life of your
dishwasher,
the filter
will require
maintenance
to sustain
peak
cleaning
performance.
The triple
filter
system consists
of 2 parts,
an upper
filter
assembly
and a lower filter.
The upper
filter
assembly
keeps oversized
items and foreign
objects,
along
with
very fine food
particles
out of the pump.
The lower filter
keeps food
from
being
recirculated
onto
your
dishware.
Upper Filter
! _s
_ _ \S
Assembly
Lower Filter
In order
to provide
optimum
cleaning
performance
we suggest
a monthly
filter
maintenance
by removing
and inspecting
both
the
upper
and the lower
filter
for any soils. Based on your
dishwashing
habits,
cleaning
of the filters
may
be required
more or less often
than
what
is indicated
in the chart
below.
The filters
may need
to be cleaned
when:
Visible
objects
or soils are on the Upper
Filter Assembly.
There
is degradation
in cleaning
performance
(that
is, soils still present
on dishes).
Dishes feel gritty
to the touch.
Removing
and maintaining
the filters
is very easy. The chart
below
shows the recommended
cleaning
frequency.
Recommended
time interval to clean your filter.
Number of
Loads Per Week
8-12
4-7
1-3
If you wash
before
loading
Once
per year
Once
per year
Once
per year
If you scrape and rinse
before loading
Every four months
Once per year
Once per year
If you only scrape before
loading*
Every two months
Every four months
Twice per year
If you do not scrape or
rinse before loading
Every two weeks
Once per month
Every two months
*Manufacturer's
recommendation:
This practice
will eliminate
the water
and energy
that you use preparing
your dishes. This will also
save you time and effort.
Very
Hard Water
If you have hard water (above 15 grains), clean your filter at least once per month. Buildup of white residue on dishwasher surfaces
indicates hard water. You may bring your water samples to Sears to check hardness level. For tips on removing spots and stains, see
"Troubleshooting"
section.
Filter
Removal
Instructions
1.
Turn the Upper
Filter Assembly
1/4 turn counterclockwise
and lift out.
2.
Grasp
the Lower
Filter
in the circular
opening,
lift slightly, and pull forward
to remove.
3.
Clean
the filters
as shown below.
Locating tab
To remove
Upper
Filter
Assembly

Publicidad

Tabla de contenido
loading

Tabla de contenido