Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC GUIDELINES
1. Open the door and load your dishes (see page 17 - 21).
Place dishes into the upper and lower racks, unless you have selected
the Upper
or Lower
(Lower
Rack
- Only) option.
Remove any food remains from the dishes before placing them in the rack(s).
After placing the dishes into the racks, turn the upper nozzles to make sure none of the dishes will
block nozzle rotation.
Make sure the dishes will not prevent the detergent
dispenser
from opening.
2o Add detergent
to the dispenser
(see page 22).
Make sure to use only automatic
dishwasher
detergent.
Refer to "Using
detergent"
on how to add detergent.
3.
Press the Power
button.
When you press the Power button,
the cycle light of the most recently finished
cycle lights up.
If "Rinse Refill" Indicator
is illuminated,
you should refill the rinse aid dispenser to improve
washing
and drying performance.
4.
Select an appropriate
cleaning cycle depending
on the soil level of the dishes. (see pages 12 and 27).
Press the appropriate
Cycle button.
When you press a Cycle button, the cycle indicator
light is illuminated.
For information
about selecting
a cycle according
to the soil level of the dishes, see "Cycle
selector".
5.
Press the Start
button,
and then close the door.
Push the racks back so that they are in place, and then press the Start button
and close the door.
Make sure to close the door firmly. If the door is slightly ajar, the selected
cycle will not start
automatically.
The dishwasher
will start draining after a few seconds,
and then start the cycle you selected.
6.
When the wash cycle is completed.
The "End" light illuminates
and the dishwasher
sounds a chime.
The power
is automatically
turned off after a few minutes.
/_
If you want to load more dishes or pause the dishwasher
while it is already
running,
make sure to open
OAO"--_",T,O
the door slowly and carefully as there is a possibility
of injury from the hot steam or water inside the
dishwasher.
(If the door is opened while the dishwasher
is running,
a safety mechanism
is activated
and stops the
cycle.) To resume operation,
press the Start
button,
and then close the door.
Note that adding dishes several minutes after the dishwasher
started
operating
may affect the
performance.
You should
use rinse aids for better drying performance.
You can further improve
drying performance
by also selecting
the Dry+ option.
English o 13
Publicidad
Tabla de contenido
