Inspection And Maintenance - Weka 816.3001.00.00 Instrucciones De Montaje, De Manejo Y De Mantenimiento

INSPECTION AND MAINTENANCE

The following regular checks must be performed:
Routine check (weekly to monthly)
Check
- if all bolts, nuts and screws are tight
- if the ground and safety area correspond to the safety notes above
Effectiveness check (1 to 3 months)
Check
- the stability of the ground anchoring and structure
- for unusual wear and replace any damaged parts
Periodic check (once or twice a year)
Check
- for rust and erosion
- for unusual wear and replace any damaged parts
RECOMMENDATION
• Pre-drill all screw connections
which are indicated by the following symbol:
WOOD
• Wood is a natural product. Varied colouring, knurls and crack formation are normal and have
no influence on the structural integrity.
• Shrinkage cracks may occur due to extreme weather, especially after extended
warm periods. These dry cracks are in no way a defect in quality but are a part of the natural
appearance of the wood. Depending on the weather, these cracks may close up again to a
minimum.
Moreover, these dry cracks, which form longitudinally in the wood, have no effect
on the strength and resilience of the material.
WOOD PRESERVATION FOR UNTREATED PRODUCTS
• Untreated wood requires wood preservation measures.
For professional wood preservation treatment, contact a wood preservative expert.
Before assembly, we recommend that you treat all untreated wood components with blue stain
and then with a wood protection agent. Regular painting according to the
specifications of the manufacturer of the wood protection agent is necessary to protect the wood.
• The customer is responsible for carrying out wood preservation measures.
No guarantee can be given if the wood is not properly preserved.
Please also read the provisions relating to this in our guarantee statements.
Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.  Copyright HRB 3662