Makita BTW074 Manual De Instrucciones página 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Lamp
7 Display
8 Indication button
9 Indicating lamp
10 Socket
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Standard battery cartridges
Warning: Use only the battery cartridge(s) described.
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
CORDLESS IMPACT WRENCH SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
2. Wear ear protectors.
Explanation of general view
11 Anvil
12 O-ring
13 Pin
14 Standard bolt
15 Fastening torque
16 Fastening time
17 Seconds
18 Number of impacts
(Presetting number)
19 High tensile bolt
Model
Standard bolt
High tensile bolt
Square drive
–1
)
Overall length
Net weight
Rated voltage
BTW074
M5 – M12
M5 – M10
9.5 mm
0 – 2,500
0 – 3,500
65 N•m
144 mm
BL1430A / BL1415NA
1.3 kg / 1.1 kg
D.C. 14.4 V
3. Check the socket carefully for wear, cracks or
damage before installation.
4. Hold the tool firmly.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
ENE036-1
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
GEA010-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
GEB049-2
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
20 Limit mark
21 Rear cover
22 Screws
23 Spring
24 Recessed part
25 Arm
26 Carbon brush cap
27 Lead wire
28 Spacer
29 Hole
BTW104
M5 – M12
M5 – M10
9.5 mm
0 – 2,700
0 – 3,500
95 N•m
144 mm
BL1430A / BL1415NA
1.3 kg / 1.1 kg
D.C. 14.4 V
ENC007-7
5