Possible errors
The following is a list of possible errors, their causes and their resolution.
Error
Remote control (2) does not
react.
Quadrocopter (1) does not
react.
Quadrocopter (1) cannot be
controlled.
Quadrocopter (1) does not fly
upwards.
24
GB/IE
Possible cause
Remote control (2) is switched
off.
Batteries (3) are inserted
incorrectly.
Batteries (3) are empty.
Batteries (3) in the remote
control (2) are inserted
incorrectly or are empty.
Storage battery (1g) in the
quadrocopter (1) is empty.
Control lamps (1c) are not
flashing or lit.
Quadrocopter (1) out of range.
Wind too strong or breeze.
Insufficient gas.
Storage battery (1g) is empty.
Resolution
Switch remote control (2) on.
Insert batteries (3) correctly.
Replace batteries (3).
Check batteries (3) and replace
if necessary.
Charge storage battery (1g).
Connect storage battery
plug connection (1d) with
quadrocopter plug connection
(1e).
Ensure that the distance
between the remote control (2)
and the quadrocopter (1) is no
more than 30m.
The quadrocopter (1) is only
suitable for use in a wind-still
environment without a breeze.
Push the throttle (2a) all the way
forwards.
Charge the storage battery
(1g).