Endress+Hauser eco-graph Manual De Utilización página 54

Method used with Set-up diskette:
1. Copy set-up to diskette:
- Place a formatted diskette into the unit diskette drive.
- Select "Diskette functions \ Save set up to diskette" from the main menu.
- Remove the diskette from the unit and place into the PC diskette drive.
2. Match the set-up in the PC programme and save to respective data bank:
- Select "Functions \ Paperless recorder \ Read parameter diskette and read the
respective set up file (*RPD) from the diskette drive (e.g. A:\).
- Match the unit settings to the desired parameters.
- Select "Save to data bank and transmit". The new set up parameters are
automatically saved to the PC data bank as well as the set up diskette.
- Remove the diskette from the PC diskette drive and replace it into the unit diskette
drive.
3. Read the set up into one (or more) unit(s):
- Select "Diskette functions \ Load set up from diskette" from the main menu.
Method used with serial interface:
1. Connect the unit to the PC using the serial interface (optional "Digital I/O"),
e.g. RS 232.
2. Start the PC programme and select "Unit \ Display/change unit settings \ New unit.
3. Match the unit settings to the required parameters and select "Save in data bank
and transmit to unit". The new set up parameters are automatically saved to the PC
data bank and transmitted to the unit.
52