Dry Ironing - Kasanova SWO000017NOC Manual De Instrucciones

CORDLESS STEAM IRON

DRY IRONING

To iron without steam, follow the instructions in section "steam ironing", leaving
the steam selector (D) on position "
Spray Function
Make sure that there is water in the reservoir. Press the spray button (E)
slowly (for a dense spray) or quickly (for a vaporized spray) [Fig. 6].
Warning: for delicate fabrics, it's recommended to moist the fabric beforehand
using the spray function (E), or putting a damp cloth between the iron and the
fabric. To avoid staining, do not use the spray on silk or synthetic fabrics.
CLEANING
• Note: before cleaning the iron in any way, make sure that the appliance
plug is not connected to the socket.
• Any deposits, starch residue or size left on the plate can be removed
using a damp cloth or an unabrasive liquid detergent.
• Avoid scratching the plate with steel wool or metallic objects.
• The plastic parts can be cleaned with a damp cloth then wiped over with a
dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. It's
recommended to use it every 10-15days.
Directions:
-Fill the reservoir up to the maximum level indicated and set the steam
selector (D) to " "
-Set the thermostat knob (I) to the maximum temperature and wait for the light
(L) to turn off.
-Pull the plug out of the socket and hold the iron horizontally over the sink.
-Hold the cleanout button (J) setting until all the boiling water, steam,
impurities come out [Fig. 7].
-When the soleplate has cooled down, you can clean it with a damp cloth.
CORDLESS USE
• In addition to the typical utilization with a cable, it's also possible to
separate the steam iron from the cable base and use it for a short period.
• To separate the steam iron from the cable base slide the switch into the
unlock position. The steam iron could now be used without cable,
• Note: the steam iron cannot be heated up without the cable base, so it can
work only for a short period without the cable base. Reconnect the steam
iron with the cable base as soon as the steam blast or the ironing quality
diminishes.
• To reconnect the steam iron with the cable base, insert the steam iron into
".
17