Ceasa OSMOTIC Manual De Instrucciones página 54

10.- Connect the OSMOTIC's outlet tube to the auxiliary
faucet. Connect the other end of the tube to the OSMOTIC
(white/ transparent tube).
Before connecting the equipment to the power supply, water main must be connected to OSMOTIC and
it must be verified that there is no water leakage.
Below, the correct OSMOTIC assembling:
54
Step 10
11.- Make the connections to the system and connect it to
the power supply. The auxiliary pump is used when the inlet
pressure is not high enough.
1 - 12 V Transformer.
2 - Osmotic programmer (technical service).
3 - Optional auxiliary pump.
Step 11