Salicru PLC Serie Manual De Usuario, Instalación Y Puesta En Marcha página 19

General contents.
1.- VIEWS OF THE RE2 or PLC2 AND CONTROLS. (See figures 4, 5 and 6).
2.- LETTERING CORRESPONDING TO THE VIEWS OF THE EQUIPMENT.
3.- GENERAL SAFETY INSTRUCTIONS.
4.- BLOCK DIAGRAMS.
5.- INSTALLATION.
5.1.- Connection to raw mains.
5.2.- Output connections.
6.- START UP AND STOP OF THE EQUIPMENT.
6.1.- To turn on an equipment with the structure according to figure 1.
6.2.- To turn on an equipment with the structure according to figure 2.
6.3.- To turn off an equipment with the structure according to figure 1.
6.4.- To turn on an equipment with the structure acording to figure 2.
7.- START-UP AND STOP OF AN EQUIPMENT FITTED WITH HI/LOW VOLTAGE PROTECTION.
7.1.- Automatic (MR) and Manual (M) versions. To turn on an equipment with the structure according to figure 1.
7.2.- Automatic (MR) and Manual (M) versions. To turn on an equipment with the structure according to figure 2.
7.3.- Cancellation - Activation of the Hi/Low voltage protections.
7.4.- To turn off an equipment with Hi/Low voltage protections.
8.- INTERFACE .
9.- COMMON TECHNICAL SPECIFICATIONS.
10.- TECHNICAL SPECIFICATIONS DEPENDING ON THE MODEL.
- 19 -