Intended Use - Mannesmann 17610 Manual De Instrucciones

Please read and act upon the enclosed safety instructions before operating
electrical tools!

Intended use

The battery powered drill is intended for:
• Drilling in wood, metal and plastic
• Inserting and removing nuts and screws
Additional safety instructions for battery powered drills
• Before working on a component, ensure that the component is held down using a vice or
fastening clamp.
• Do not use excessive pressure, but instead select an appropriate speed. Excessive pressure
will not increase drilling efficiency, and may damage your appliance.
• Set the rotation direction switch to its central position when machine not in use in order to
avoid accidental operation.
• Only use the battery charger in closed rooms and do not expose this to rain or humidity.
• When inserting the batteries into the battery charger, ensure that the correct polarity is used.
• Do not use a battery charger whose power lead is damaged. Always replace or repair this.
• In the event of damage being apparent to the battery charger housing, have this examined
by a specialised repair shop and if necessary replaced.
• Always wear protective eyewear and ear protectors when working. A dust mask
should be worn during any dust-producing work.
Specification (Fig. 1)
1. Keyless drill chuck
2. Adjustable ring for torque / boring
3. 1 / 2-way operating switch
4. Left / right-hand motion changeover switch
5. Operating button
6. Battery pack
7. Battery attachment clip
8. Working spot light
9. Loading station
10. Plug adaptor
Cordless drill
Item no. 17610
Operating instructions
GB - 8