Technical Data; Charging Procedure - Mannesmann 17610 Manual De Instrucciones

Technical data

Battery powered drill:
Voltage
Rotation speed, Setting 1.
Rotation speed, Setting 2.
Drill chuck
Sound pressure level (LPA)
(Uncertainty K = 3 dB)
Sound power level (LWA)
(Uncertainty K = 3 dB)
Vibration drilling
(Uncertainty K = 1,5 m/s²)
It is recommended that safety goggles, ear protectors and a face mask are worn during
drilling!
Batteries: Voltage
Charging time
Charging unit
Noise and vibration information
Measured values determined according EN 60745
- The vibration emission level given in this information sheet has been measured in accor-
dance with a standardised test given in EN 60745 and may be used to compare one tool
with another.
- The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
Try to keep the exposure as low as possible. To reduce the vibration emission level the user
-
should wear working-gloves and use the machine for limited time.
All parts of working cycles have to be considered ( including the time the power tool is
-
switched off, and the time, when the power tool is running under no-load condition).

Charging procedure

Before their first use, the battery set (6) must be loaded.
•
Only use the provided charging unit (9) to charge the battery set.
•
Only charge the battery set when the ambient temperature is within 10° - 40° C.
•
• Plug the adaptor (10) to a 230V alternating voltage source and connect it with the loading
station. The green LED indicates the charger is ready for loading.
Do not insert foreign objects into the openings in the charging unit.
•
The battery set (6) should under no circumstances be disassembled.
•
To remove the battery set, press the attachment clip (7) on the top side of the battery set
•
and extract the battery set (6).
The battery set (6) should be inserted into the charging unit (9) to its fullest extent.
•
18 V DC
0 – 350 min
0 – 1,250 min
13 mm
78 dB (A)
89 dB (A)
2,242 m/s²
18 V DC
abt. 1 hour
Pri: 100-240 V~/ 50-60 Hz
Sec: 23 V / 1,2 A
-1
-1
GB - 9