Charge State Display; Items Supplied; Technical Data - Hilti SID 2-A12 Manual De Instrucciones Original

▶ Use only Hilti Li­Ion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C4/12 series for charging these
batteries.

3.3 Charge state display

The charge state of the Li­ion battery is displayed after pressing one of the
release buttons lightly (press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.

3.4 Items supplied

Impact screwdriver/wrench, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Store or online at:
www.hilti.group
4

Technical data

4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01
Rated speed under no load
Ambient temperature for operation
Storage temperature
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
22 English
Printed: 19.08.2019 | Doc-Nr: PUB / 5509357 / 000 / 00
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
2235358
*2235358*
SID 2­A12
10.8 V
1.1 kg
0 /min ...
2,750 /min
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
10.8 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃