Technical Data; Ec Declaration Of Conformity - Primo HSM 102.2 Instrucciones De Servicio

HSM 102.2
Primo 1200

7 Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting German DIN 32757 – 1
Cutting ca pa ci ty (Sheet)
A4
Weight
Lo ading width
Cutting speed
Voltage
Power for the maximum number of
sheets
Dimensions W x D x H (mm)
Volume of shred. mat. container
Noise level (idle running)

EC Declaration of Conformity

Machinery directive 98 / 37 / EC
EMC directive 89 / 336 / EEC
Low voltage directive 73 / 23 / EEC
The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, 88682 Salem, Germany declares
herewith, that the paper shredder HSM 102.2 and Primo 1200 correspond with the above men-
tioned EC Directives including all relevant modifi cations.
Applied standards and technical specifi cations:
• EN 294:1992
• EN 55014-2:1997 + A1:2001
• EN 61000-3-3:1995 + A1:2001
• EN 55014-1:2000 + A1:2001 + A2:2002
Salem, 01.12.2004
Machine type inspection for compliance with the requirements of the EC Machinery Directive
was carried out by the „Administration/Inspection Authority Committee of Experts, Subject Area
Offi ce Machines and Devices", on the premises c/o Verwaltungs-Berufsgenossenschaft, Deelbö-
genkamp 4, 22297 Hamburg, Germany. This inspection authority is the authority responsible in
accordance with Annex V of the EC Machinery Directive.
10
70 g/m
2
80 g/m
2
• EN 60950-1:2001
• EN 61000-3-2:2000
Rolf Gasteier - Technical Manager
Strip cut
1.9 3.9
3 2
8 - 9 13-15
5 - 7 10-12
6.3 kg
60 mm/s
230 V, 50 Hz
365 x 273 x 500
58 - 60 dB (A)
Cross cut
5.8 4 x 25
2 3
16-18 6 - 7
13-15 3 - 5
6.8 kg
225 mm
150 W
25 l
0802