Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Dear customer,
Thank you for purchasing an ALFRA product. Please read these operation instructions closely before using
your device for the first time and keep them along with the enclosed Product Control Card for later reference.
SAFETY INSTRUCTIONS
Danger can occur when working with this punch driver due to improper handling and/or poor maintenance,
which may damage the device and cause severe physical injuries. Please observe all safety instructions and
contact us if you have any questions.
!
Always...
• Use the punch driver for its specified use
• Check the punch, tools and tension bolt for
damage and cracks before use
• Keep hands and fingers away from the
punching die and punch
• Stop the punching process manually when
punching holes in thin or soft metal sheets
• Wear the following protective equipment:
safety goggles, gloves and sturdy shoes
• Avoid contact with cutting edges
• Follow the instructions in these operating
instructions
• Train new users in the use of this device
• Clean any oil residues off the rubber handle
• Remove the battery before changing the tools
• Use genuine ALFRA batteries
• Disconnect the battery charger from the mains
once the battery is charged completely
• Store the hydraulic punch in a dry place,
free of corrosive substances
Fire hazard!
!
Sparks may be generated during operation of electric motors! Flammable or explosive
substances can ignite!
!
Never...
• Process several sheets placed on top of each
other in one punching process
• Work on objects or components that are
under electrical or mechanical tension
• Work near live cables or electrical conductors
• Make changes to the device or remove
information labels
• Use if damaged or parts are missing
• Damage, kink or squeeze the hydraulic hose
• Use the hand-operated hydraulic device
without proper training
• Use the device if you have not read and
understood these operating instructions
completely
• Store or operate at temperatures below -10°C
(14°F) and above 40°C (104°F)
• Bring into contact with corrosive substances
• Modify or open the battery by force
• Charge the battery near flammable substances
or gases
• Use in an environment where there is a risk
of explosion
11
Publicidad
Tabla de contenido
