Ec Declaration Of Conformity - i.safe MOBILE ORBIT 2.0 Manual Del Usuario

English
Serial Number
The serial number marked on the headset is in the following format:
O020.YYWW.NNNN
With: YY: production year
WW: production week
NNNN: consecutive number

3 EC Declaration of Conformity

The EC declaration can be found at the end of this manual.
4 Faults and Damages
If there is any reason to suspect that the safety of the headset has been com-
promised, it must be withdrawn from use and removed from any ex-hazardous
areas immediately. Measures must be taken to prevent any accidental restar-
ting of the headset.
The safety of the headset may be compromised, if, for example:
• malfunctions occur.
• the housing of the headset or the battery shows damage.
• the headset has been subjected to excessive loads.
• the headset has been stored improperly.
• markings or labels on the headset are illegible.
It is recommended that a headset which shows or which is suspected of faults
and damages is returned i.safe MOBILE GmbH for inspection.
5 Ex-relevant Safety Regulations
Use of this headset assumes that the operator observes the conventional saf-
ety regulations and has read and understood manual, safety instructions and
certificate.
The following safety regulations must also be complied with:
• The housing of the headset must not be opened inside ex-hazardous areas.
• The battery is not changeable by the user.
• The battery may only be charged outside ex-hazardous areas.
• The headset may be charged only at temperatures in between 0°C ... 40°C.
• The headset must not be exposed to abrasive acids or bases.
• The headset not be taken into zones 0 or 20.
• Only accessories approved by i.safe MOBILE GmbH may be used.
i.safe MOBILE
5