English
6 Further Safety Advises
• Charge the headset under indoor conditions only.
• Please do not put the headset in environments with excessive temperatures,
as this could lead to heating of the battery, resulting in fire or explosion.
• Do not charge the headset near any flammable or explosive substances.
• Do not charge the headset in environments with much dust, humidity, or
excessively high or low temperatures (the permitted charging temperature
range is 0 ... 40°C).
• Do not expose the headset or charger to strong magnetic fields, such as are
emitted from induction ovens or micro-waves.
• Do not attempt to open or repair the headset. Improper repair or opening
can lead to the destruction of the headset, fire or explosion. Only authorized
personnel are allowed to repair the headset.
• Only use accessories approved by i.safe MOBILE GmbH.
• Please power off the headset and disconnect the charging cable before cle-
aning the headset.
• Do not use any chemical cleaning agents to clean the headset or the charger.
Use a damp and anti-static soft cloth for cleaning.
• Do not discard old and abandoned lithium batteries into the trash, send
them to des-ignated waste disposal locations or return them to i.safe MO-
BILE GmbH.
Warning
i.safe MOBILE GmbH will not assume any liability for damages caused by disre-
garding any of these advices or by any inappropriate use of the headset.
7 Maintenance / Repair
Thank you for using the ORBIT 2.0. If there is a problem with the headset, please
contact your vendor or consult the service center. If your headset is in need of
repair, you can either contact the service center or your vendor.
8 Getting Started
8.1 Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compatible devices wi-
thout cables. The headset and the other device do not need to be in line of
sight, but they should be within 10 meters (33 feet) of each other. Connections
may be subject to interference from obstructions, such as walls, or other elec-
tronic devices.
6
i.safe MOBILE