Warranty Conditions; Advice On Disposal - Siemens slider SL20 Instrucciones De Uso

Problem
The iron does • The boiler is not switched on or the
not produce any water tank is empty.
steam. • The steam regulator is set to the
minimum position.
The ironed gar- • The selected temperature is too high
ment turns dark and has damaged the garment.
and/or sticks to
the soleplate.
The soleplate turns • This is a regular consequence of usage.
brown.
The appliance • Water is being pumped into the steam tank.
makes a pumping • The sound will not stop.
sound.
Loss of pressure Steam release button activated during a
during ironing. long period of time.
Waterspots May be caused by steam condensed on
appear on the the ironing board.
garment during
ironing.
Water spots Water spots are caused by steam
appear on the condensation in the hose when cooling
garment during down after use.
use of the "XTRM
steam" function
The hose gets hot This is normal. It is caused by the steam
during use. passing throug the hose during steam
ironing.
Water leakage Drainage plug located at the bottom of the
from the boiler appliance is loose.
The iron does not "Pulse steam" function activated by double
stop steaming click.
after placing it on
the pad.
If the above does not solve the problem, get in touch with authorized technical service.

Warranty conditions

The terms of the guarantee for this appliance are in
accordance with that stated by our representative
for the country in which it is sold. The details of
these conditions can be obtained from the retailer
from whom the appliance was purchased. The
purchase receipt must be presented when making
any claims against the terms of this guarantee.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
You can download this manual from the local homepages of Siemens.
Possible causes
waste disposal service as secondary raw materials.
Your local town council can give you information
about how to dispose of obsolete appliances.
The guideline determines the framework for
the return and recycling of used appliances as
applicable throughout the EU.
Solution
• Set the main power button (12) to the
"I" position and/or fill the water tank.
• Increase the steam flow by turning
the steam control (10).
• Select a suitable temperature for the
material being and clean the sole
plate with a damp cloth.
• Clean the soleplate regularly with a
damp cloth.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
Use the steam release button with
intervals. This improves the ironing
result as the textiles will be dried and
stay smooth better.
Wipe the textile cover of the ironing
board, and iron the spots without
steam to dry them.
Water drops stop coming out of
the soleplate after using the "XTRM
steam" function for some time.
Place the hose on the opposite side
so that you can not touch the hose
during ironing
Tighten up boiler drainage plug with
a coin
Just press the trigger once again and
the iron will stop steaming at once.
This appliance is
accordance with European Directive
2002/96/EG concerning
electrical and electronic appliances
(waste electrical and
equipment - WEEE).
en
labelled in
used
electronic
15