Overview Of The Components; Operating The Appliance - FAURE FKM-901ME1 Manual Del Usuario

OVERVIEW OF THE COMPONENTS

Names of parts
12
11
3
2
1
10
13a
Main Components and Standard Accessories
1
Driver shaft
2
Derection mix
3
Front cover
4
Drive arm
5
Power cord
6
Pulse operation and level regulator
7
Level for raising and lowering the arm
8
Switch buttom
8
4 6 8 5
7
9
13b 13c
9
Support
10
Mixing Bowl
11
Splash Cover
12
Funnel
13a
Hook
13b
Beater
13c
Whisk

OPERATING THE APPLIANCE

Speed regulator
Timing display
Speed 0-8
Led
Switch
1. Power plug connected to the power supply and press the
powerswitch (8), the speed show "0»and the time show "00:00».
2. When the speed show «0»,if the consumer forget to turn off the power switch, 5 minutes the LED will no
display and the machine return to standby mode automatically.
3. Turn the knob CW one time,the speed rise 1(0-8),opposite turn the knob CCW one time ,the speed
4. In each speed turn the knob CW keep 3 seconds,speed no change,the second again, timing recover.
All the reset will be clearing when press the power switch (8) or pull out the power plug. Turn the speed
to 0 when the machine is working, timing no be 0 clearing, equivalent to suspend the machine then
timing recover when it resumes work.
5. In each speed ,turn the knob CCW keep 3 seconds, timing will be 0 clearing and reset. After turn off
the timing,this operation is invalid.The level will falling 1 in this opertion some times.
6. The drive arm (4) is upwards or pull upward the drive arm(4) when the machine is working, speed will
return to 0. Timing no 0 clearing if the machine is working ,After pull down the drive arm and the
timing will recover ,but the speed need to reset(B).
A
GB
Time
Knob
B
9