Getting Started; Charging Procedure - Vidis Brooklyn Manual De Instrucciones

Dual Charger
Thank you for purchasing the Brooklyn Wii™ Dual Charger for Wii™ Remote. Please read all instructions thoroughly and
familiarize yourself with all the features.
Contents:
1x double charging station for Wii™ Remote
2x 700mAh NiMH batteries
2x battery compartment lids with charging
contacts for Wii™ Remote
1x adapter cable
1x operating instructions

Getting started

1. Please remove any packaging material from the Brooklyn™ Dual
Charger.
2. Switch off your Nintendo Wii™ console and pull the plug from the
socket.
3. Plug the adapter cable between the Wii™ console and Wii™ power
supply as shown.
4. Connect the charger connection of the adapter cable with the
Brooklyn™ Dual Charger.
5. Plug the plug into the socket and switch on your Nintendo Wii™ console.
Important: charge the batteries for 12 hours before using for the first
time! Please note that NiMH batteries must be charged completely approx. three to five times before they reach their
full capacity.

Charging procedure

1. Remove the battery cover of the Wii™ Remote and remove the batteries.
2. Insert the battery into the battery compartment of your Wii™ Remote. Close it with the provided Brooklyn™ battery
compartment lid.
3. Insert the Wii™ Remote into a charging tray of the Brooklyn™ Dual Charger.
4. The LED of the charging tray will shine red constantly during the charging procedure.
5. The batteries are fully charged when the red LEDs blink.
Please note that the battery packs and the Dual Charger may not be disposed of with the household trash!
Customer service:
VIDIS GmbH • Rungedamm 37
D-21035 Hamburg • Germany
1
W090.indd 1
Features:
Charges one or two Wii™ Remotes
Also charges when the Wii™ conso-
le is switched off
Tel.: +49-40-514840-48
Fax: +49-40-514840-40
E-Mail: service@vidis.com
Internet: www.vidis.com
FOR Wii™
30.10.2009 11:19:11 Uhr