EdilKamin BIG Manual De Instalación, Uso Y Mantenimiento página 16

COVERING INSTALLATION BIG/VIP
10
9
54
78
57-58
78
41
23
22
22
43
78
150
150
57
57 57
150
150
58 58
58 58
150 150
detail. "Y"
150
150
41
41
150
150
41
41
150
150
DETAIL. Z
Part. "Z"
22
62
bushings
23 24
vite
screw
2 M6x25 screws
2 M6x12 screws
4 silicone spacers for ceramic top
2 bushings
16 silicone spacers for ceramics
holes are located (to be used according to the models).
for the VIP model (Illustr. 3-4)
and lower holes.
en the cast iron base and the lower, right-hand tile (58) (see
detail Y - Illustr. 4).
the lower left side ceramic tile use the stop adjustment screws
located on the zinc-plated sides of the structure (Illustr. 5-6)
against the upper right side ceramic tile (57).
Left-hand side (Illustr. 6): remove the upper left ceramic tile
side ceramic tile (58).
for the BIG model (Illustr. 8-9)
NOTE: Being made through a process of casting,the tiles may
differ slightly in height. To compensate for any height varia-
affecting the aesthetic appearance of the stove.
ASSEMBLING THE UPPER FRONT PANEL BIG/VIP
against the front panel support (23) positioned above the door.
the 2 supplied M6x25 screws (the door must be opened before
performing this operation).
NOTE: For correct assembly of the upper front panel (22), pla-
ce the bushing supplied between the same and the front panel
(23), as shown in detail "Z" in Illustr. 11.
the cast iron lower front grill (43) in place and remove it.
fasten it in place using the 2 supplied M6x25 screws as indica-
- 16
-
-